Serial Communications 3104
REC XXXXX 3-5
- DISPLAY SCROLL 8 -
Date
> DD-MM-YYYY <
CHOICE ENTER
- DISPLAY SCROLL 9 -
Run display line 3
> No Display <
CHOICE ENTER
- MAIN MENU 5 -
Press MENU for more
COMM A PRINT
- COMM. A SCROLL 1 -
Baud rate port #1
> 2400 <
CHOICE ENTER
Then date can be set to show month or day first, in three possible configurations:
Password: Service
If USA: Default: MM-DD-YYYY
If other language: Default: DD-MM-YYYY
Selections: DD-MM-YYYY, MM-DD-YYYY, YYYY-MM-DD
3. When a COMM board is installed, date and time can be displayed line three
(3) in the RUN screen if selected using DISPLAY SCROLL 9.
Password: Operator
Default: NO DISPLAY
Selections: NO DISPLAY, LOAD, SPEED, DATE/TIME
3.4.2 COMM A and Print Scroll Set-Up
Main Menu 5 is dedicated to the serial line. COMM A is used to set up the serial
line of the COMM A , regardless if the serial line is connected to a computer or
a PLC or for printing. The PRINT scroll is used for setting up the printer, and it only
appears if the COMM A is set for printer.
1. Line Setting and Protocol Definition
Two COMM line can be installed and programmed, typically one for the printer and one for the
supervisor.
The following screens define the communication parameters for the first and the second channel.
Password
: Service
Default: 9600
Selections: 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200
To Next Page
Loading...
Need help?
General
