Serial Communications 3104
REC XXXXX 3-9
- PRINTER SCROLL 2 -
End of line
> CR <
CHOICE ENTER
- PRINTER SCROLL 3 -
Delay end of line
0 sec
ENTER
- PRINTER SCROLL 4 -
Form Feed
> NO <
CHOICE ENTER
- PRINTER SCROLL 5 -
Print interval
0 min
ENTER INTV
Default: NONE
Selection: NONE, CTS, XON-XOFF
Different printers use different end of line patterns. Select the one you need according to the printer.
Password: Service
Default: CR
Selection: CR, LF, CR+LF
Some simple printers cannot accept characters while they are printing. In some cases the handshake is
not well controlled by the printer, so a delay at end of line is helpful.
Password: Service
Default: 0 sec
Min: 0 sec
Max: 5 sec
A Form Feed character can be sent to the printer after each report to force the printer to eject the paper.
Password: Service
Default: NO
Selections: NO, YES
If you want to generate periodical printing, enter the number of minutes, hours or days in the following
screen. By entering 0, the periodical printing is prevented. Use the INTV key to switch from minutes to
hours and to days.
Password: Service
Default: 0
Min: 0 min, 0 hour, 0 days
Max: 59 min, 23 hour, 365 days
The system can print at specific times during the day. Enter the time you want to obtain the printing.
Use the NEXT keys to scroll between the print times. Up to four discrete times may be entered. The
ON/OFF key enables or disables the displayed print time.
To Next Page
Loading...