thermopatch.com
Manual HS-4-C V.2.1 ENG Original Version QC/TDPT/mn March 2020 6
1. Introduction
1.1 WHAT DID YOU RECEIVE?
The HS-4-C has been packed in a cardboard box. The
following articles should have been delivered:
• HS-4-C heat seal machine
• Electrical power cable
• User’s Guide on CD-ROM
If one of these articles is missing, please contact our
customer service or your Thermopatch supplier.
1.2 THE HS-4-C
1.3 YOUR SUPPLIER
Please look at our website, www.thermopatch.com to nd your
supplier. E-mail: sales@thermopatch.nl
1.4 SPECIFICATIONS OF THE HS-4-C
The machine HS-4-C is practical and universally applicable. It
can be used to apply patches, textile emblems, heat seal trans
-
fers, in short all Thermopatch materials suited for marking and
mending to textiles and technical bres
The HS-4-C machine is a semi-automatic machine wich
is manually operated. The set temperature, time and
pressure are presented upon its display.
The Thermoseal HS-4-C has been manufactured in
accordance with the European guideline for Low Voltage
2006/95/EG and the EMC guideline 2004/108/EC.
You will nd this declaration inside this manual on the
supplied CD.
thermopatch.com
To Next Page
Loading...
