thermopatch.com
Manual HS-4-C V.2.1 ENG Original Version QC/TDPT/mn March 2020 8
2. Installation
tained at your Thermopatch supplier.
2.1 INSTRUCTION FOR HANDLING
The HS-4-C has been packed in a cardboard box. If you need
the relocate the machine at a later point, we advise you to
pack the machine in a similar fashion. Let the machine cool
down completely before packing and moving it.
2.2 INSTALLING AND CONNECTING THE HS-4-C
Take the Thermoseal HS-4-C from its box and place it onto
a stable worktop near an earthed wall socket. Connect the
machine with the supplied power cord to the electrical current
(230 Volt, alternating current). Thermoseal HS-4-C is earthed
thermopatch.com
To Next Page
Loading...
