thermopatch.com
Manual HS-4-C V.2.1 ENG Original Version QC/TDPT/mn March 2020 7
TITLE SPECIFICATION
LOWER PLATEN SIZES 95 X 12 CM (OPTIONAL)
HEATING IRON 10.16 X 12.7 CM
HEATING RANGE 20-230 °C
ELECTRICAL 3 AMPS @ 240 VAC
50/60 HZ
TIME SETTINGS 0-30 SECONDS
MAXIMUM OPERATING PRES-
SURE
NOT APPLICABLE
HEIGHT (OPEN) 49.0 CM
HEIGHT (CLOSED) 24.0 CM
LENGTH (OPEN) 52.0 CM
LENGTH (CLOSED) 53.34 CM
WIDTH 19.0 CM
SHIPPING WEIGHT 23.6 KG
NET WEIGHT 21.0 KG
WARRANTY 1 YEAR
1.5 SAFETY
At normal usage no problems are to be expected. Regardless
that, we state underneath a few pointers which will limit
existing risks to a minimum.
• Unplug the machine from the wall socket whenever you
are maintaining or cleaning the machine.
• Make sure there is enough working space around the
machine. Although the heat radiation of the press is very low,
it is still necessary to have enough room for cooling down.
Extensions and connections must not get snagged.
• Avoid contact with the press arm and the heating
element.
• Pull the fabric tightly over the sealing pad.
1.6 CONDITIONS OF WARRANTY AND PRODUCT LIABILITY
Thermopatch points to its warranty and product liability condi
-
tions as laid down in our sales conditions. These can be ob-
thermopatch.com
To Next Page
Loading...
