Thies CLIMA Compact WSC10 - Command LC; Command NC; Command RD

© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany 022028/02/23
Phone +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·www.thiesclima.com Page 30 of 40
6.3.9 Command LC
<id>LC<parameter><CR> LED control
Access: Read / write.
Description: The command LC is used to specify the mode for control of the
green LED.
Parameter description:
Parameter
Description
0
LED indicates wind speed
1
LED is dark
Value range: 0 / 1
Initial value: 0
6.3.10 Command NC
<id>NC<parameter><CR> North correction of the wind direction
Zugriff: Read / write
Beschreibung: An offset for the wind direction in ° is specified with the
command NC. This can be used to correct the north direction.
Wertebereich: 0 … 360
Initialwert: 0
6.3.11 Command RD
<id>RD<parameter><CR> Response delay.
Zugriff: Read / write
Beschreibung: The RD command is used to query or set the response delay
between receiving a command and sending the response.
Parameter description: Delay in milliseconds e.g. 20  20[ms]
Wertebereich: 0 … 50
Initialwert: 20