Thies CLIMA Compact WSC10 - Command SV; Command TR; Command TT

© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany 022028/02/23
Phone +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·www.thiesclima.com Page 32 of 40
6.3.14 Command SV
<id>SV<CR> SW-Version
Access: Read.
Description: The software version can be read by means of command SV.
Parameter description: -
Response telegram: -
Value range: -
Initial value: -
6.3.15 Command TR
<id>TR<parameter><CR> Telegram output
Access: Read / write.
Description: This command initiates one-off transmission of a telegram. The
parameter specifies the type of telegram.
Parameter description: 1 Measured value telegram.
2 Sensor data telegram.
Response telegram: See chapter 6.1.1
Value range: 1 ... 2
Initial value: -
6.3.16 Command TT
<id>TT <parameter><CR> Automatic telegram output
Access: Read / write.
Description: The command TT is used to select the automatic output of
telegrams (interval = 1 second).
Automatic telegram output remains switched off for the first 10
seconds after start-up of the Weather Station. During this time
the user has the opportunity of changing the parameter TT.
Parameter description: 0 Automatic telegram output switched off.
1 Measured value telegram.
2 Sensor data telegram.
Response telegram: See chapter 6.1.1
Value range: 0...2
Initial value: 0