Third Dimension GapGun MX+ - 6 Connecting the Gapgun MX+ Via LAN Cable; Waistpack Settings

GapGun MX+/SPC3d6 Connectivity Guide
© Third Dimension Confidential Document D11-678 Page 16
SPC3d6.0
6 CONNECTING THE GAPGUN MX+ VIA LAN CABLE
6.1 WAISTPACK SETTINGS
LAN CABLE
You will need to use the LAN cable supplied in the
GapGun MX+ kit.
LAN CABLE TO WAISTPACK
Plug the LAN cable from your supplied kit into the
waistpack.
You must ensure the connectivity switch is switched to
the Ethernet connection setting.
LAN CABLE TO PC
Plug the other end of the LAN cable into your PC.