Third Dimension GapGun MX+ - Page 29

GapGun MX+/SPC3d6 Connectivity Guide
© Third Dimension Confidential Document D11-678 Page 24
SPC3d6.0
REBOOT NOW
You must reboot the GapGun MX+ to finalise DHCP settings.
SPC3D SERVER MENU
Once the GapGun MX+ has rebooted navigate back to the
SPC3d Server menu.
AVAILABLE SPC3D SERVERS
Within the SPC3d Server menu you will now see all the
computers running SPC3d on your server. Your screen will look
different to this; you may have only 1 available SPC3d Server.
Tap on the SPC3d Server you wish to connect to.