3.1 Technical specications
Main unit
Powersupply(Uin): 9–30V
Sirenoutput: 9-30V(Uin)/1A
Indicatoroutput: 60W
Currentconsumption: approx.11mA
Assignabletransmittersmax: 100
Receivingfrequency: 868.35Mhz
Numberofcodes: >4billion.(>4,000,000,000)
Temperaturerange: –10°Cto+80°C
Interfaces: RJ11(outputforPro-nderforalarmforwarding)
CANbusinterface
Remote control 868, magnetic contact 868
Transmissionpower: <10mW
Range max: 75 m in the open
Batterytype(transmitter): CR2032(buttoncell/3V)
Batterylife(transmitter): approx.2years
Transmittingfrequency: 868.35Mhz
Numberofcodes: >4billion.(>4,000,000,000)
Temperaturerange: –10°Cto+60°C
3.2 Approvals
E1 This alarm system for recreational vehicles is tested and
approvedaccordingtoECEregulationno.10,revision03.
3.3 Disposal instructions
When decommissioning the device, do not dispose of it with
householdwaste.Municipalrecyclingcentreshavesuitable
containers for the disposal of electronic equipment.
3.4 Technical support
If there is a problem which cannot be eliminated with
the aid of this manual when using this system,
please consult your specialist dealer:
Serial number of the unit:
If your specialist dealer is unable to help, please contact our technical support:
+49(0)4316666811
Disclaimer:
As with any other alarm system, WiPro III can only report a break-in or attempted
break-in, but it cannot prevent it. Therefore, be wise and do not leave any valuables on view
or where they are easily accessible in the vehicle or leave the vehicle unlocked.
Thitronik does not accept any liability for stolen valuables or damage to the vehicle
caused by a break-in.
WiPro III Operating Instructions Page 8
GB