THM Clavicula M3 - Bottom Bracket

9
Clavicula M³
Specifications
Bottom bracket
(a) Road (BSA/ITA): Bearing cup left/right
(b) MTB (BSA): Bearing cup left/right,
3× spacer ring (2.5mm)
(c) BB30 Road: Bearing cup left/right
(d) BB30 MTB: Bearing cup left/right,
2× spacer ring (2.5mm)
(e) PressFit 30 Road: Bearing cup left/right
(f) PressFit 30 MTB: Bearing cup left/right
(g) BBright™ PressFit Road:Bearing cup left/right
(h) BBright™ PressFit MTB:Bearing cup left/right,
1× spacer ring, right (4.0mm)
(i) Press-fit Road: Bearing cup left/right
(k) Press-fit MTB: Bearing cup left/right,
2× spacers (2.0mm)
(l) BBright™ Direct Fit Road: 2× bearings,
1× spacer ring, right (9.0mm)
(m) EVO386 Road (FSA
®
): Bearing cup left/right,
1× spacer ring, right (1.0mm)
a
g
i
l
e
b
d
f
k
m
c h