Need help?Do you have a question about the THM Clavicula M3 and is the answer not in the manual?
General| Material | Carbon Fiber |
|---|---|
| Chainring Mounting | Direct Mount |
| Chainring Compatibility | THM-Carbones, Praxis Works, Garbaruk (Direct Mount) |
| Q-Factor | 148 mm |
| Chainline | 43.5mm |
| Weight (172.5mm, without chainrings) | 293g |
| Compatibility | Shimano, SRAM |
| Crank Length Options | 170mm, 172.5mm, 175mm |
| BCD | Not applicable |
| Bottom Bracket Compatibility | BB386EVO, BB30, PF30, BSA |
| Bottom Bracket Standard | BB386EVO, BB30, PF30, BSA |
| Chainring Bolt Pattern | Direct Mount |
Warns about risks associated with improper assembly/maintenance, emphasizing professional work, correct tools, and original parts.
Advises on safe riding practices, speed adjustment, protective gear, and compliance with traffic regulations and IMBA directives.
Specifies the correct torque values for all screw connections, along with lubrication recommendations for safe assembly.
Covers the overall process of installing the Clavicula crankset, emphasizing safety and professional execution.
Step-by-step guide for installing BSA/ITA bottom bracket cups, including spacer placement and specific tightening torques.
Instructions for installing BB30, PressFit 30, and BBright™ PressFit bottom bracket cups, detailing spacer usage and torque settings.
Procedures for pressing bearing cups for Press-fit, EVO386, and BBright™ Direct Fit bottom brackets into the frame housing.
Covers assembling chainwheels to the spider and installing the crankset onto the axle, including spacer use and bearing seat preparation.
Describes how to properly adjust the bottom bracket to eliminate play without over-tensioning, including final screw torques.
To Next Page