Press [VOICE] to enter the menu VOICE. The default value corresponds to the voice number
that is assigned to the crash pad in the respective kit, e.g. ‘96’ in kit ‘001’.
The control LED of the button lights up and the three-digit LED display shows the voice
number that is assigned to the activated pad (activation by pressing a button or hitting the
pad). Then you can select the desired voice using the [SELECT –/+] buttons.
Press [VOLUME], to open the menu VOICE.
The control LED of the button lights up and the three-digit LED display shows the current
volume setting of the activated pad (activation by pressing a button or hitting the pad). Now
you can adjust the volume using the [SELECT –/+] buttons.
Pad voice
Pad volume
Operating
mobile drum
24
To Next Page
Loading...
Need help?
General