Use the [REVERB] button to enter the REVERB menu. The three-digit LED display shows the cur‐
rently selected reverb level in ‘Rxx’ format. Use the [SELECT –/+] buttons to adjust the level
stepwise as desired from 0…3.
The set value is automatically saved.
1. Prepare recording: Select a song and a drum kit. Determine the desired tempo and the
settings for DRUM OFF and REVERB.
2. Start recording: Press [REC]. The control LED of the button starts flashing. Press
[START/STOP] or hit a pad to start the recording. The control LED of the button goes out.
3. Stop recording: Press [REC] or [START/STOP]. The control LED of the button goes out. If
the memory is used up the recording is automatically stopped and the three-digit LED
display shows ‘FL’
Reverb effect
Recording
Operating
mobile drum
30
To Next Page
Loading...
Need help?
General