Press [PAN], to open the menu VOICE.
The control LED of the button lights up and the three-digit LED display shows the assignment
of the activated pad (activation by pressing a button or hitting the pad). Then you can adjust
the position of the pad within the stereo panorama using the [SELECT –/+] buttons.
Press [NOTE], to open the menu VOICE.
The control LED of the button lights up and the three-digit LED display shows the currently
assigned MIDI note. Now you can assign any MIDI note using the [SELECT –/+] buttons.
Pan setting
Assign a MIDI note
Operating
MD-90
25
To Next Page
Loading...
Need help?
General