6.2 Demo song
To play the preprogrammed demo piece, proceed as follows:
1. Press [CLICK] for about two seconds.
ð
The preprogrammed demo song sounds, ‘dE’ appears on the display.
2. Stop playback with [START / STOP].
6.3 Playing and adjusting patterns
Your digital drum set features a total of 40 preprogrammed patterns. Pattern ‘001’ is displayed
by default when the drum module is turned on.
1. Press [MODE] repeatedly until the LED [PATTERN] lights up.
ð
The display shows the pattern number.
2.
Use the buttons [–] and [+] to select the desired pattern (see
Ä
Chapter 11.3 ‘Pattern list’
on page 49).
Selecting patterns
Operating
MPS-150
25
To Next Page
Loading...
Need help?
General