1. Select the desired pattern as described above.
2. Start and stop playback with [START / STOP].
1. Press [MODE] repeatedly until the LED [PATTERN] lights up.
ð
The display shows the pattern number.
2. Press [PAGE].
ð
The pattern volume appears in ‘Axx’ format on the display.
3. Adjust the volume using the buttons [–] and [+] in a range from 00 to 32.
The setting is automatically stored.
1. Press [MODE] repeatedly until the LED [PATTERN] lights up.
ð
The display shows the pattern number.
Playing patterns
Adjusting pattern volume
Adjusting drum volume
Operating
e-drum module
26
To Next Page
Loading...
Need help?
General