thomann millenium mps-150 - Setting Click Interval and Sound

1. Press [MODE] repeatedly until the LED [CLICK] lights up.
2. Press [PAGE].
ð
The Click interval appears on the display, for example ‘--4’.
3. Select the Click interval using the buttons [–] and [+]. Possible values are: 1/4, 1/8, 1/12,
1/16, 1/24, default value: 1/4.
The setting is automatically stored.
1. Press [MODE] repeatedly until the LED [CLICK] lights up.
2. Press [PAGE].
ð
The set sound, the so-called ‘click instrument’ is displayed in ‘CLx’ format.
3. Use the buttons [–] and [+] to select the sound. Possible values are: CL1 – CL5, default
value: CL1.
The setting is automatically stored.
Setting Click interval
Setting the Click sound
Operating
MPS-150
35