Thomas 153 User Manual

16
2.12 QUICK - TACH
The quick - tach, which is standard equipment, allows
changing from one attachment to another quickly without
having to remove bolt or pins.
To operate, (Fig. 2.11A), lift the locking lever (1) up to
completely retract the locking pins (2). Tilt the quick - tach
frame forward (Fig. 2.11B) with the bucket tilt cylinders and
drive into the attachment. Retract the bucket tilt cylinders
(Fig. 2.11C) which will line up the bottom of the attachment
with the quick - tach lock pins. Shut off the engine.
Push the locking lever (1) fully down (Fig. 2.11D) extending
the lock pins (Fig. 2.11E item 2) through the attachment and
securing the attachment.
Before operating the attachment check that the locking pins
are correctly engaged.
After hooking up the
attachment check to be
sure pins and locking
levers are correctly
engaged.
WARNING
C3967
C3964
Fig. 2.11B
Fig. 2.11A
C 3966
C 3968
Fig. 2.11E
1
1
2
Fig. 2.11D
1
2
1
C3965
Fig. 2.11C
1
1
1
1
2
1
2. CONTROLS

Thomas 153 Specifications

General

Brand	Thomas
Model	153
Category	Compact Loader
Language	English