Need help?Do you have a question about the Thomas T105 and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, and IMPORTANT terms and their associated symbols used in the manual.
Essential safety guidelines to prevent accidents during loader operation and maintenance.
Safety measures and precautions to follow while operating the loader.
Critical safety instructions to adhere to when performing maintenance on the loader.
Details the function of each indicator light and switch on the loader's instrument panel.
Information on adjusting and using the seat and seat belt for operator safety and machine control.
Explains the seat bar's function in engaging the parking brake and operator safety.
Instructions for using the throttle control and operating lift arm supports for safety.
Details steering operation and the use of optional hand controls for loader functions.
Explains the operation of lift arms, bucket tilt, and auxiliary hydraulic functions.
Describes the switch for engaging the auxiliary hydraulic circuit for attachments.
Details the operation of lift, tilt, and auxiliary hydraulic functions via foot pedals.
Explains the quick-tach system for rapid attachment changes.
Overview of the 12-volt electrical system, including fuses and relays.
Comprehensive steps for pre-operation checks, starting the engine, and safe shutdown.
Guidelines for safe operation and instructions on filling the bucket from a material pile.
Techniques for effective digging, including bucket tilt and driving maneuvers.
Procedures for spreading material and leveling ground surfaces.
How to operate attachments using auxiliary hydraulics and guidance on lifting the loader.
Instructions for safely towing a stuck loader and securing it for transport.
Instructions for battery care and safe jump-starting procedures.
Emergency procedure for lowering lift arms during an electrical failure.
Scheduled maintenance tasks based on operating hours for optimal loader performance.
Essential daily inspections for critical systems like fluids, tires, and safety equipment.
Specific service items to be performed by a dealer after the first 50 hours of operation.
Locates access points and details maintenance for final drive housings, including oil and chain checks.
Covers maintenance for hydraulic oil, filters, hoses, and system checks.
Details engine specifications, oil, filter, coolant, fan belt, and fuel system maintenance.
Procedures for daily inspection and servicing of the air cleaner element.
Wiring diagrams illustrating the loader's electrical system components and connections.
Guidelines for tire inflation, service, and rotation for optimal wear and safety.
Solutions for common problems related to the hydrostatic drive and hydraulic systems.
Presents diagrams of the hydraulic and hydrostatic circuits for system understanding.
Lists specialized tools required for specific maintenance and repair tasks.
Detailed specifications including dimensions, weight, and performance data.
Lists torque values for fasteners and specifies the loader's sound power level.
Identifies and locates all safety and instructional decals on the loader.
Lists Thomas approved buckets and attachments with their specifications and approximate weights.
Explains DANGER, WARNING, CAUTION, and IMPORTANT terms and their associated symbols used in the manual.
Essential safety guidelines to prevent accidents during loader operation and maintenance.
Safety measures and precautions to follow while operating the loader.
Critical safety instructions to adhere to when performing maintenance on the loader.
Details the function of each indicator light and switch on the loader's instrument panel.
Information on adjusting and using the seat and seat belt for operator safety and machine control.
Explains the seat bar's function in engaging the parking brake and operator safety.
Instructions for using the throttle control and operating lift arm supports for safety.
Details steering operation and the use of optional hand controls for loader functions.
Explains the operation of lift arms, bucket tilt, and auxiliary hydraulic functions.
Describes the switch for engaging the auxiliary hydraulic circuit for attachments.
Details the operation of lift, tilt, and auxiliary hydraulic functions via foot pedals.
Explains the quick-tach system for rapid attachment changes.
Overview of the 12-volt electrical system, including fuses and relays.
Comprehensive steps for pre-operation checks, starting the engine, and safe shutdown.
Guidelines for safe operation and instructions on filling the bucket from a material pile.
Techniques for effective digging, including bucket tilt and driving maneuvers.
Procedures for spreading material and leveling ground surfaces.
How to operate attachments using auxiliary hydraulics and guidance on lifting the loader.
Instructions for safely towing a stuck loader and securing it for transport.
Instructions for battery care and safe jump-starting procedures.
Emergency procedure for lowering lift arms during an electrical failure.
Scheduled maintenance tasks based on operating hours for optimal loader performance.
Essential daily inspections for critical systems like fluids, tires, and safety equipment.
Specific service items to be performed by a dealer after the first 50 hours of operation.
Locates access points and details maintenance for final drive housings, including oil and chain checks.
Covers maintenance for hydraulic oil, filters, hoses, and system checks.
Details engine specifications, oil, filter, coolant, fan belt, and fuel system maintenance.
Procedures for daily inspection and servicing of the air cleaner element.
Wiring diagrams illustrating the loader's electrical system components and connections.
Guidelines for tire inflation, service, and rotation for optimal wear and safety.
Solutions for common problems related to the hydrostatic drive and hydraulic systems.
Presents diagrams of the hydraulic and hydrostatic circuits for system understanding.
Lists specialized tools required for specific maintenance and repair tasks.
Detailed specifications including dimensions, weight, and performance data.
Lists torque values for fasteners and specifies the loader's sound power level.
Identifies and locates all safety and instructional decals on the loader.
Lists Thomas approved buckets and attachments with their specifications and approximate weights.
General| Operating Weight | 5400 lbs |
|---|---|
| Width | 56 in |
| Engine Make | Kubota |
| Rated Operating Capacity | 1050 lbs |
| Max Lift Height | 110 in |
To Next Page
