THOMSON ST585 V6 - Page 30

E-DOC-CTC-20080627-0003 v1.0
Chapter 4
Wireless
24
3 Under Wireless, click your access point.
4 The Wireless Access Point page appears.
5 In the Navigation bar, click Configure.
6 Under Security, you can change the Encryption. If you want to use:
 WPA-PSK Encryption, continue with “4.2.1 Configuring WPA-PSK Encryption” on page 25.
 WEP Encryption, continue with “4.2.2 Configuring WEP Encryption” on page 26.
i
Your access point will be listed in the following format: “WLAN:<Network Name> (<Actual
Speed>)”. For example, WLAN: SpeedTouch83C7C7 (54Mbps).