THOMSON THT700 - User Manual

Questions and Answers

J
Jeff MartinezAug 9, 2025
What to do if my THOMSON THT700 says 'No signal found'?
- D
  Donna IrwinAug 9, 2025
  If your THOMSON TV Receiver shows 'No signal found', ensure the antenna cable is securely connected. Check the antenna for damage or misalignment. Inspect the cable connecting the antenna to the receiver for any damage and ensure it's properly connected. If you're using an active antenna, enable its power supply in the receiver's menu. Also, verify that the TV input corresponds to the receiver's output; check the cable.
A
angela40Aug 13, 2025
What to do if there is no picture or sound on my THOMSON THT700 TV Receiver?
- E
  Emma KimAug 14, 2025
  If your THOMSON TV Receiver is not displaying a picture or sound, ensure all cables are properly connected between the TV and the receiver. As a precaution, disconnect both the receiver and the TV from the power mains, disconnect the connecting cable, and then reconnect it securely, ensuring it's firmly plugged into the ports.
C
chelsea46Aug 19, 2025
Why is the standby mode indicator not lighting up on my THOMSON TV Receiver?
- R
  Robert LambertAug 19, 2025
  If the standby mode indicator on your THOMSON TV Receiver isn't lighting up, first verify that the power adapter is correctly plugged into a working outlet and connected to the receiver. Also, if the receiver is connected via an extension cord, make sure the power switch on the extension cord is turned on.
C
Corey McdanielAug 25, 2025
Why is the picture or sound quality poor on my THOMSON THT700 TV Receiver?
- C
  Cody MoralesAug 25, 2025
  If you're experiencing poor picture or sound quality on your THOMSON TV Receiver, it could be due to a weak signal caused by bad weather. Consider using a higher quality antenna for more stable reception. Also, check the antenna and cable for damage, especially if you have an outdoor antenna that might be iced or frozen. If you have moved an indoor antenna, place it back where reception was constant, and check the signal strength and quality. If using an active antenna, ensure its power supply is activated in the receiver's menu.
J
Jimmy SpencerAug 29, 2025
How to fix a THOMSON TV Receiver remote control that is not working?
- M
  Marie LawrenceAug 29, 2025
  If the remote control isn't operating your THOMSON TV Receiver, try replacing the batteries. Make sure to point the remote control directly at the infrared sensor on the receiver, and remove any obstacles that might be blocking the signal. You can also try turning the receiver off and on again.
K
Kayla VillarrealSep 3, 2025
Why does my THOMSON THT700 TV Receiver show a message about an encrypted channel?
- R
  robleswilliamSep 3, 2025
  If you see a message about an encrypted channel on your THOMSON TV Receiver, it might mean that the channel is not included in your subscription package.

THOMSON THT700 Specifications

General

Type	TV Receiver
Supported Formats/Standards	DVB-T2, DVB-C, DVB-S2
Electronic Program Guide (EPG)	Yes
Smart TV	No
HDR	No
HDMI Ports	1
USB Ports	1
Wi-Fi	No
Bluetooth	No
Resolution	1920 x 1080
Connectivity	HDMI, USB
Power Supply	100-240V AC, 50/60Hz
Media Playback	Yes