What to do if my THOMSON THT504 remote control is not working?
If your THOMSON TV Receiver remote control is not responding, ensure the receiver is plugged in and turned on. Aim the remote directly at the front panel, check for any obstructions blocking the signal, and replace the remote batteries if they are exhausted.
Why does my THOMSON TV Receiver say 'No signal found'?
If you see a 'No signal found' message on your THOMSON TV Receiver, check that the aerial lead is properly connected and undamaged. If you are using an active antenna, ensure that the receiver’s Antenna Power is switched ON or connect external power. If the problem persists, consult your dealer, as you might be out of the digital signal area.
What to do if my THOMSON TV Receiver lost signal after moving it?
If you have moved your THOMSON TV receiver and are no longer getting digital reception, the antenna signals may be too weak. Press the INFO button on the remote three times to view signal bars and adjust the antenna for maximum reception, or try rescanning channels. If using an indoor antenna, consider switching to an outdoor antenna.
Why is there no picture or sound from my THOMSON TV Receiver?
If there is no picture or sound on your TV or amplifier when using your THOMSON TV Receiver, ensure that the correct HDMI or SCART input is selected on your TV or amplifier. Also, make sure your TV/amplifier is switched on. If using S/PDIF, check the connection. Try selecting a lower resolution on the receiver if the unit is set to a higher resolution than your TV supports.
What does 'Scrambled channel' mean on my THOMSON TV Receiver?
The 'Scrambled channel' message on your THOMSON TV Receiver indicates that the channel you are trying to watch is scrambled. Select an alternative channel.
How to stop my THOMSON THT504 from turning off automatically?
If your THOMSON TV Receiver switches off automatically, the Auto Standby function may be enabled. Disable the auto standby feature in the settings. See section 7.3.7 for details.
Why is my THOMSON THT504 freezing during video playback?
If the playback of video or Timeshift on your THOMSON TV Receiver causes picture freeze, macro blocks, or similar distortion, especially on HD content, it could be due to the read/write speed of your USB device being too low. Use a USB storage device with sufficient speed and space; pen drives may not provide sufficient speed.
Why is the LED indicator not lit on my THOMSON THT504 TV Receiver?
If the LED indicator on your THOMSON TV Receiver is not lit, check that the mains plug is properly connected.
What to do if there is no picture or sound on my THOMSON TV Receiver?
If you experience a lack of picture or sound, ensure that your TV or amplifier is switched on and set to the correct HDMI or SCART input. If using S/PDIF connection, check it. Also, make sure the unit's resolution is supported by your TV. If the resolution is too high, select a lower resolution on the receiver.
Why is my THOMSON TV Receiver remote control not working?
If your remote control isn't working, ensure the receiver is plugged in and turned on. Aim the remote directly at the front panel, and check for any obstructions. Replace the remote batteries if they are exhausted.
Essential safety guidelines for installation, usage, and care of the receiver.
Recommendations for proper storage and initial equipment setup.
Recommendations for using USB storage devices with the receiver.
Identifies and describes components on the receiver's front panel.
Details the various input and output connectors on the rear panel.
Explains the buttons and their functions on the remote control.
Step-by-step guide for inserting batteries into the remote control.
Guidelines for effective use of the remote control.
Connecting the antenna and TV via HDMI or SCART.
Connecting audio amplifiers, USB devices, and TVs via S/PDIF, HDMI, 3.5mm jack.
Connecting analogue audio and USB storage devices.
Methods for switching between TV channels.
Accessing info banner, selecting audio language.
Accessing Teletext and selecting subtitle languages.
Pausing and resuming live TV broadcasts.
Viewing EPG, setting timers, and instant recording.
Editing, locking, moving, and managing TV and radio channel lists.
Settings for scanning and tuning channels, including antenna power and LCN.
Configuring language, TV system, time, timers, parental lock, OSD, and auto standby.
Accessing system information, factory reset, and software upgrades.
Information about the pre-installed games.
Accessing and playing media files from USB devices.
Viewing USB drive details and formatting options.
Configuring Timeshift, recording, and playback features.
Procedures for safely disconnecting USB storage devices.
Essential safety guidelines for installation, usage, and care of the receiver.
Recommendations for proper storage and initial equipment setup.
Recommendations for using USB storage devices with the receiver.
Identifies and describes components on the receiver's front panel.
Details the various input and output connectors on the rear panel.
Explains the buttons and their functions on the remote control.
Step-by-step guide for inserting batteries into the remote control.
Guidelines for effective use of the remote control.
Connecting the antenna and TV via HDMI or SCART.
Connecting audio amplifiers, USB devices, and TVs via S/PDIF, HDMI, 3.5mm jack.
Connecting analogue audio and USB storage devices.
Methods for switching between TV channels.
Accessing info banner, selecting audio language.
Accessing Teletext and selecting subtitle languages.
Pausing and resuming live TV broadcasts.
Viewing EPG, setting timers, and instant recording.
Editing, locking, moving, and managing TV and radio channel lists.
Settings for scanning and tuning channels, including antenna power and LCN.
Configuring language, TV system, time, timers, parental lock, OSD, and auto standby.
Accessing system information, factory reset, and software upgrades.
Information about the pre-installed games.
Accessing and playing media files from USB devices.
Viewing USB drive details and formatting options.
Configuring Timeshift, recording, and playback features.
Procedures for safely disconnecting USB storage devices.
General| Aspect ratio | 4:3, 16:9 |
|---|---|
| Signal source | Terrestrial |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p |
| Analog signal format system | NTSC, PAL |
| Digital signal format system | DVB-T |
| Personal Video Recorder (PVR) included | No |
| Tuner type | Digital |
| Product color | Black |
| Audio decoders | Dolby Digital Plus |
| Interactive TV | - |
| Number of tuners | - tuner(s) |
| Channels quantity | 1000 channels |
| Audio output channels | - channels |
| Electronic Program Guide (EPG) | Yes |
| Audio formats supported | AAC, AC3, PCM |
| Image formats supported | JPG |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Cables included | AC |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.4 W |
| Power consumption (typical) | 4.17 W |
| Storage temperature (T-T) | -10 - 50 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Depth | 130 mm |
|---|---|
| Width | 148 mm |
| Height | 37 mm |
| Weight | 260 g |
To Next Page
