6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the
remote control. Channel numbers can be up to four digits long. Entering a number with less than
four digits is possible. Just wait a few seconds and your receiver will switch to the selected channel
or press OK immediately after selecting the channel number.
6.1.2 Channel list
Press OK in viewing mode to display the Channel List. Use pq in the channel list to highlight
your channel of choice and press OK once to select the highlighted channel. Press OK again to
leave the channel list mode. Inside the channel list it is possible to use the PG+/PG- buttons as
well in order to scroll page-wise through the list.
TIP: Use
tu to toggle between the All Channel list and favourite list(s) or press
FAV in viewing mode for a list of available favourite lists.
6.1.3 Using the pq buttons
p
switches to the next channel.
q switches to the previous channel.
6.2 Info Banner
While watching TV you can press the INFO button at any time to access current information about
the channel and event*. Press INFO twice for extended EPG details about the current channel.
Press INFO three times for technical details about the current channel.
*Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio
stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed.
Use pq to select the desired stream and confirm with OK. The audio channel as stereo, mono,
left and right can be selected with the tu buttons.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TTX button in viewing
mode and use the 0~9 buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages directly, as indicated on the
bottom of the Teletext screen. Use the pq buttons to select one page up or down, use tu
buttons to select subpages. Press EXIT or TTX to get back to viewing mode.
To Next Page
Loading...
