To Next PageTo Next PageWhat to do if my THOMSON THT504+ TV Receiver remote control is not responding?
If your THOMSON TV Receiver isn't responding to the remote control, first ensure the receiver is plugged in and turned on. Then, aim the remote directly at the front panel, check for any obstructions blocking the signal, and replace the remote batteries if they are exhausted.
Why does my THOMSON THT504+ TV Receiver say 'No signal found'?
If your THOMSON TV Receiver displays a 'No signal found' message, check that the aerial is properly connected and not damaged or misaligned. If you are in an out-of-digital-signal area, consult your dealer. Also, if you're using an active antenna, ensure the receiver’s Antenna Power is switched ON or connect external power.
Why is there no picture or sound on my THOMSON THT504+ TV Receiver?
If you are experiencing no picture or sound on your TV or amplifier when using your THOMSON TV Receiver, ensure that the correct HDMI or SCART input is selected on your TV or amplifier. Also, verify that your TV/amplifier is switched on and that the receiver's resolution is supported by your TV. If using S/PDIF connection, check its setup. You may also need to select a lower resolution on the receiver.
What to do if my THOMSON THT504+ TV Receiver loses signal after moving it?
If you've moved your THOMSON TV Receiver and are now unable to receive digital reception, it may be due to weak antenna signals. Press the INFO button on the remote control three times to view the signal bars and adjust the antenna for maximum reception, or rescan the channels. If you're using an indoor antenna, try switching to an outdoor antenna, as the signal strength may be weaker in the new location.
What does 'Scrambled channel message' mean on my THOMSON TV Receiver?
If your THOMSON TV Receiver displays a 'Scrambled channel message', it means the channel you're trying to watch is scrambled. Simply select an alternative channel.
How to fix a THOMSON TV Receiver with LED indicator not lit?
If the LED indicator on your THOMSON TV Receiver is not lit, the mains lead might be unplugged. Check the mains plug to ensure it is properly connected.
Why does my THOMSON THT504+ switch off automatically?
If the THOMSON TV Receiver switches off automatically, the Auto Standby function may be enabled. Disable the auto standby function in the settings.
Why does my THOMSON TV Receiver picture freeze during video playback?
If playback of video (or Timeshift) is causing picture freeze/macro blocks or similar distortion, especially on HD content on your THOMSON TV Receiver, the read/write speed of your USB device could be too low. Use a USB storage device with sufficient speed and space. Pen drives (‘USB sticks’) may not support sufficient speed.
Safety precautions for installation, exposure, power cords, cleaning, and internal hazards.
Guidelines for storing the receiver and its accessories, including packaging for transport.
Recommendations for professional installation or self-setup, including cable connections.
Lists included accessories like remote control and batteries.
Recommendations for USB 2.0 devices, formatting, and potential compatibility issues.
States the default PIN for the receiver.
Identifies and describes the components on the front panel.
Identifies and describes rear panel connectors.
Lists buttons on the remote and their primary functions.
Instructions on how to insert batteries into the remote control.
Guidance on optimal usage and range of the remote control.
How to connect an antenna to the receiver using ANT IN/OUT connectors.
Instructions for connecting the receiver to a TV using an HDMI cable.
Instructions for connecting the receiver to a TV using a SCART cable.
How to connect the receiver to an amplifier using S/PDIF for sound.
Connecting receiver to amp via HDMI, then amp to TV for audio/video.
Connecting the receiver to an analogue amplifier using a 3.5mm jack cable.
Recommendations for connecting USB devices for recording and playback.
Guides the user through the initial setup wizard for language, region, and other settings.
Details antenna setup options like power and beeper during the initial wizard.
Provides a brief overview of basic receiver operations like turning on/off and changing channels.
Introduces the features and operations of the receiver.
Explains methods for changing channels via direct input, channel list, or navigation buttons.
How to display channel and event information using the INFO button.
How to choose different audio streams or languages for broadcasts.
How to access and navigate Teletext services using the remote.
How to select available subtitle languages for broadcasts.
How to pause live TV and resume playback using the Timeshift function.
How to use the EPG to view schedules, programme info, and mark recordings.
How to record the current program immediately using the RECORD button.
Accessing the menu to sort, rename, or delete channels.
Managing the list of TV channels, including adding to favorites.
How to add channels to up to 8 different favorite groups.
How to lock channels using a PIN code to restrict access.
How to mark channels to be skipped during channel zapping.
How to reorder channels within the channel list.
Detailed options for sorting, renaming, and deleting channels.
Information on managing radio channels, similar to TV channel lists.
How to delete all stored channels and favorite lists from the receiver.
How to personalize the names of the 8 available favorite channel lists.
Performing an automatic scan to find all available channels.
Manual channel scanning options, including by channel or frequency.
Settings for powering an active antenna from the receiver.
Option to enable or disable logical channel numbering for channel order.
Setting preferences for on-screen display, audio, and subtitle languages.
Configuring video resolution, aspect mode, and connection type (HDMI/SCART).
Setting the region, GMT offset, and daylight saving time.
Configuring timed events for recording or waking up the receiver.
Protecting installation menus and channels with a PIN code.
Adjusting OSD timeout and transparency for on-screen displays.
Configuring the automatic standby function to save power.
Viewing hardware/software versions and the web address.
Resetting the receiver to its default factory settings.
Information about upgrading receiver software over-the-air.
Instructions for upgrading receiver software using a USB storage device.
Backing up and restoring channel lists via USB.
Enabling automatic checking for Over The Air software upgrades.
Information about the games available on the receiver.
Playing back various file types like video, music, and images from USB.
Displaying information about the connected USB device and formatting options.
Configuring settings for Timeshift, recording, and playback.
Safely disconnecting a USB storage device from the receiver.
Lists common problems, their possible causes, and solutions.
Safety precautions for installation, exposure, power cords, cleaning, and internal hazards.
Guidelines for storing the receiver and its accessories, including packaging for transport.
Recommendations for professional installation or self-setup, including cable connections.
Lists included accessories like remote control and batteries.
Recommendations for USB 2.0 devices, formatting, and potential compatibility issues.
States the default PIN for the receiver.
Identifies and describes the components on the front panel.
Identifies and describes rear panel connectors.
Lists buttons on the remote and their primary functions.
Instructions on how to insert batteries into the remote control.
Guidance on optimal usage and range of the remote control.
How to connect an antenna to the receiver using ANT IN/OUT connectors.
Instructions for connecting the receiver to a TV using an HDMI cable.
Instructions for connecting the receiver to a TV using a SCART cable.
How to connect the receiver to an amplifier using S/PDIF for sound.
Connecting receiver to amp via HDMI, then amp to TV for audio/video.
Connecting the receiver to an analogue amplifier using a 3.5mm jack cable.
Recommendations for connecting USB devices for recording and playback.
Guides the user through the initial setup wizard for language, region, and other settings.
Details antenna setup options like power and beeper during the initial wizard.
Provides a brief overview of basic receiver operations like turning on/off and changing channels.
Introduces the features and operations of the receiver.
Explains methods for changing channels via direct input, channel list, or navigation buttons.
How to display channel and event information using the INFO button.
How to choose different audio streams or languages for broadcasts.
How to access and navigate Teletext services using the remote.
How to select available subtitle languages for broadcasts.
How to pause live TV and resume playback using the Timeshift function.
How to use the EPG to view schedules, programme info, and mark recordings.
How to record the current program immediately using the RECORD button.
Accessing the menu to sort, rename, or delete channels.
Managing the list of TV channels, including adding to favorites.
How to add channels to up to 8 different favorite groups.
How to lock channels using a PIN code to restrict access.
How to mark channels to be skipped during channel zapping.
How to reorder channels within the channel list.
Detailed options for sorting, renaming, and deleting channels.
Information on managing radio channels, similar to TV channel lists.
How to delete all stored channels and favorite lists from the receiver.
How to personalize the names of the 8 available favorite channel lists.
Performing an automatic scan to find all available channels.
Manual channel scanning options, including by channel or frequency.
Settings for powering an active antenna from the receiver.
Option to enable or disable logical channel numbering for channel order.
Setting preferences for on-screen display, audio, and subtitle languages.
Configuring video resolution, aspect mode, and connection type (HDMI/SCART).
Setting the region, GMT offset, and daylight saving time.
Configuring timed events for recording or waking up the receiver.
Protecting installation menus and channels with a PIN code.
Adjusting OSD timeout and transparency for on-screen displays.
Configuring the automatic standby function to save power.
Viewing hardware/software versions and the web address.
Resetting the receiver to its default factory settings.
Information about upgrading receiver software over-the-air.
Instructions for upgrading receiver software using a USB storage device.
Backing up and restoring channel lists via USB.
Enabling automatic checking for Over The Air software upgrades.
Information about the games available on the receiver.
Playing back various file types like video, music, and images from USB.
Displaying information about the connected USB device and formatting options.
Configuring settings for Timeshift, recording, and playback.
Safely disconnecting a USB storage device from the receiver.
Lists common problems, their possible causes, and solutions.
General| Brand | THOMSON |
|---|---|
| Model | THT504+ |
| Category | TV Receiver |
| Language | English |
