5: Press 5 to add a file to the play list. A favourite icon will be shown next to the
file.
6: Press 6 to add all files of this directory/folder to the play list. Press 6 again to
delete all files from the play list.
7: Press 7 to open the Edit menu. This menu allows you to access of the
following functions: rename 4, copy 5, delete 6, create folder 7.
2: Press button 2 to open the sort window. You can sort by Name/Time/Size
and Favourite.
INFO: Press INFO to access slideshow settings. You can change the slide time and
slideshow repetition.
3: Press 3 to show the files in a preview of 3x3 pictures.
EXIT: One step back or leave the folder and quit the function.
7.6.2 HDD Information
This option shows relevant information about the connected USB device. In this menu you can
also format your USB storage device and setup the recording type.
Select HDD Information in the Media menu and press OK to enter.
Now you will see all details as Free and the used Recording Sizes and the used file system.
Press the YELLOW button Format to format the connected USB device.
Please, enter your PIN code to access this menu and press OK to start formatting.
Warning: Formatting will permanently delete ALL data stored on the connected device.
Please make a backup copy of all data you wish to keep before entering the
HDD Format menu. THOMSON cannot be held responsible for loss of data
from USB devices used with this receiver.
Press OK to proceed, select FAT or Cancel, or press EXIT to leave without formatting.
NOTE: It is possible to use USB storage devices already formatted in NTFS.
Press EXIT to leave this menu.
7.6.3 DVR Setting
This menu allows you to configure settings for Timeshift, recording and playback.
Select DVR Setting in the Media menu and press OK to enter.
Use pq to move the highlight and tu to change settings.
Timeshift: Select between Auto, Pause or Off. When Timeshift is set to Auto it will
automatically start every time after tuning to a channel. When Timeshift is set
to Pause it will start only after pressing the YELLOW/2 button. Select Off to
deactivate Timeshift.
Step to: 30 sec to 30 min. Set the time step you like to jump forward to by pressing
4 during playback of recorded files. This only works when the info banner is
displayed on screen. If it is not, press INFO.
Time Shift to Record: If set to On the timeshifted part will be included in your recording when you
start to record the current programme.
To Next Page
Loading...
