P2
TABLE OF CONTENT
1.0 INTRODUCTION 3
1.1 Safety Instructions 3
1.2 Storage 3
1.3 Equipment Set-up 4
1.4 Accessories 4
1.5 Usage of external USB devices 4
2.0 YOUR RECEIVER 5
2.1 DEFAULT PIN: 1234 5
2.2 Front Panel 5
2.3 Rear Panel 5
2.4 Remote control 5
2.5 Installing the batteries 6
2.6 Using the remote control 6
3.0 CONNECTION 7
3.1 Connecting to a terrestrial antenna 7
3.2 Connecting to TV with HDMI cable 7
3.3 Connecting to TV with SCART cable 7
3.4 Connecting to a Digital Audio Amplifier
with S / PDIF 7
3.5 Connecting to a digital audio amplifier
and TV using HDMI 7
3.6 Connecting to an analogue Audio
Amplifier 8
3.7 Connecting a USB storage device 8
4.0 STARTING UP FOR THE FIRST TIME 8
5.0 QUICK GUIDE TO USING YOUR RECEIVER 9
6.0 OPERATION 9
6.1 Changing channels 9
6.2 Info Banner 10
6.3 Selection of audio language 10
6.4 Teletext 10
6.5 Subtitles 10
6.6 Timeshift 11
6.7 EPG (Electronic Programme Guide) 11
6.8 Instant Recording 11
7.0 MAIN MENU 11
7.1 Edit Channel 12
7.2 Installation 14
7.3 System Setup 15
7.4 Tools 17
7.5 Games 19
7.6 Media 19
8.0 TROUBLESHOOTING 22
9.0 TECHNICAL SPECIFICATIONS 23
THOMSON declares that this item complies with the basic requirements and other relevant regulations of
directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical specifications, design and
appearance of products may change. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license
from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. All other
product names are trademarks or registered trademarks of their respective owners.
© THOMSON 2015. All rights reserved.
To Next Page
Loading...
