What to do if my THOMSON Receiver remote control is not responding?
If your THOMSON Receiver is not responding to the remote control, ensure the receiver is plugged in and turned on. Aim the remote directly at the front panel, remove any obstructions, and replace the remote batteries.
What to do if my THOMSON Receiver shows 'No signal found'?
If your THOMSON Receiver displays 'No signal found', check the aerial lead for secure connection and inspect the aerial for damage or misalignment. If you are out of digital signal area, consult with dealer. If using an active antenna, ensure the receiver’s Antenna Power is switched ON or connect external power.
Why is there no picture or sound on my THOMSON Receiver?
If there is no picture or sound on your TV when using the THOMSON Receiver, ensure the correct Scart input is selected on your TV. Verify that your TV or DVD/VCR is connected to the mains. If the receiver is switched to DVD/VCR scart input, press the button on the remote control. Also, make sure your TV is switched on.
What to do if my THOMSON Receiver keeps switching off automatically?
If your THOMSON Receiver switches off automatically, the Auto Standby function may be enabled. Disable the auto standby function.
How to fix THOMSON Receiver digital reception after moving it?
If you are unable to receive digital reception after moving your THOMSON Receiver, press the button on the remote 3 times to check the signal bars and adjust the antenna for maximum reception, or rescan channels. Try a direct feed from the antenna, or use an active room antenna.
Why is the IR sensor light not lit on my THOMSON Receiver?
If the IR sensor light is not lit on your THOMSON Receiver, check if the mains lead is unplugged or the multipoint connector is switched off. Also, check the mains fuse.
Comprehensive safety guidelines and precautions for operating the receiver safely.
Guidance on proper storage, included accessories, and best practices for USB device usage.
Step-by-step instructions for initial setup, including antenna and TV connections.
Instructions for connecting the receiver to TV, antenna, recorder, and audio amplifier.
Detailed description of the receiver's front and rear panel connectors and ports.
Explanation of remote control functions, battery installation, and default PIN.
Step-by-step guide for setting up the receiver for the first time, including channel scanning.
Overview of the main menu, its submenus, and how to navigate them for various functions.
Managing channels, favorites, scanning modes, antenna settings, and LCN.
Configuring OSD language, subtitles, TV system, region, time, timers, parental lock, and auto standby.
Accessing receiver info, games, factory defaults, software upgrades, media playback, and recording.
Methods for selecting channels and accessing the Electronic Programme Guide (EPG).
How to create, manage, and access favorite channel groups.
A guide to diagnosing and resolving common issues encountered with the receiver.
Detailed technical specifications of the receiver's components, including demodulator, decoders, tuner, and connectors.
Comprehensive safety guidelines and precautions for operating the receiver safely.
Guidance on proper storage, included accessories, and best practices for USB device usage.
Step-by-step instructions for initial setup, including antenna and TV connections.
Instructions for connecting the receiver to TV, antenna, recorder, and audio amplifier.
Detailed description of the receiver's front and rear panel connectors and ports.
Explanation of remote control functions, battery installation, and default PIN.
Step-by-step guide for setting up the receiver for the first time, including channel scanning.
Overview of the main menu, its submenus, and how to navigate them for various functions.
Managing channels, favorites, scanning modes, antenna settings, and LCN.
Configuring OSD language, subtitles, TV system, region, time, timers, parental lock, and auto standby.
Accessing receiver info, games, factory defaults, software upgrades, media playback, and recording.
Methods for selecting channels and accessing the Electronic Programme Guide (EPG).
How to create, manage, and access favorite channel groups.
A guide to diagnosing and resolving common issues encountered with the receiver.
Detailed technical specifications of the receiver's components, including demodulator, decoders, tuner, and connectors.
Video Specifications| video resolution | 720 x 576 pixels (PAL), 720 x 480 (NTSC) |
|---|---|
| aspect ratio | 4:3, 16:9 |
Audio Specifications| sampling rate | 32, 44.1, 48 KHz |
|---|---|
| audio mode | Stereo, Joint Stereo, Dual Mono, Mono |
Tuner Specifications| input frequency range | 174 – 230 MHz (VHF) and 470 - 862 MHz (UHF) |
|---|---|
| loop through frequency range | 47 - 862 MHz |
| input signal level | -82 ~-20 dBm |
Memory and System| flash memory | 1 MByte |
|---|---|
| SDRAM | 8 MBytes |
Connectors| USB port | USB 2.0, 5 V DC / 800 mA (max.) |
|---|---|
| S/PDIF | coaxial output |
| IR IN | External Infrared sensor input |
Power and Consumption| supply voltage | 220 - 240 V AC (SMPS), 50/60 Hz |
|---|---|
| power consumption | 4.20 W (typ.), 5 W (max) |
| power consumption in standby | 1.17 W |
Operating Environment| operating temperature | 0 ~ 40 °C |
|---|---|
| storage temperature | -30 ~ 80 °C |
| operating humidity range | 10~85%, RH, Non-condensing |
Weight and Dimensions| size | 168 x 113 x 40 mm |
|---|---|
| net weight | 0.36 kg |
To Next Page
