19
Cleaning the Drain Pump Filter
The drain pump filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
TROUBLESHOOTING
Problems Possible Cause Possible Solutions
The washing machine will
not start.
The door is not properly closed. Close the door properly.
Poor connection to the power
supply.
Check connection to the power
supply.
Power failure Check the power supply.
Machine has not been switched
on.
Switch the machine on.
Detergent remains in the
The deterg
ent is not a low suds Check if the detergent is
WARNING :
Be careful when draining if the water is hot. Allow the water to cool down before
cleaning the drain pump filter. Risk of scalding !
Press the tab on the cover to
open the cover.
Place a low and wide container under
the water filter.
Slowly turn the filter anticlockwise until
all the water has come out.
Once the container is full, close
the water filter by turning it
clockwise. Empty the container.
Repeat the procedure until all the
water has been drained.
Remove the water filter and clean it
under running water with a soft brush.
Insert the water filter back in the
appliance by turning it clockwise.
Close the cover until a click is heard.
drawer after the program is
complete.
type. appropri
ate.
Excessive use of detergent
Reduce amount of detergent in
the detergent drawer.
To Next Page
Loading...
