21 INITIAL STARTING UP
10. The scale indicates the stylus pressure in grams. The pressure of the cartridge supplied with this turntable is 2g,
turn the entire counterweight counter-clockwise to “2g” and the anti-skating to “2g“. If a dierent cartridge is
used, adjust the stylus pressure and the antiskating indicated to the corresponding specifications.
MAINS CONNECTION
An external switching power adaptor is supplied with this turntable.
There are the RCA jack on the rear panel of the turntable. You can use it to connect to your amplifier. You also
could switch the selector to “ON” or “OFF”, and connect the RCA plug to the “LINE” input of your amplifier.
01. Place the record on the turntable. If it is a 45 rpm, you need to place the adaptor on the record spindle.
02. Choose the playing speed.
03. Release the pick-up arm clip.
04. Place the cartridge vertically over the first track of the record the turntable starts turning.
05. Lower the cue lever to place the stylus in the groove
06. When playback is complete, push the cue lever to lift the tone arm and move it back to the arm rest.
07. If you want to pause the playback, switch the knob to “o”, and switch it to 33 or 45 to continue the playback.
08. After finish the playback, please switch o the power to save energy.
To Next Page
Loading...
Need help?
General
