THORLABS MDT693B User Manual

Open-Loop Piezo Controllers
TTN011225-D02, Rev C July 7, 2015
terminator is a carriage return (CR), a line feed (LF) or any combination of a
carriage return and line feed. See listing below.
There are a few exceptions to this which are noted below, also noted are unique
shortcut keys.
The prompt symbol “<” will appear on power up and after a command is accepted
by the system indicating it is ready to receive another command line.

THORLABS MDT693B Specifications

General

Brand	THORLABS
Model	MDT693B
Category	Controller
Language	English