Need help?Do you have a question about the THORLABS ITC510 and is the answer not in the manual?
General| Type | Temperature Controller |
|---|---|
| Control Method | PID |
| Display | LCD |
| Number of Channels | 1 |
| Weight | 2.5 kg |
| Input Type | Thermistor |
| Output | Analog |
| Power Supply | 100-240 VAC |
| Control Interface | RS-232 |
Provides essential safety instructions, warnings, and precautions for operating the ITC5xx.
Covers adjustable limits for laser and TEC currents to protect devices.
Details the operating modes, sensor inputs, and setting methods for the ITC5xx.
Provides detailed specifications and parameters for the ITC502 model.
Lists detailed specifications and parameters for the ITC510 model.
Guides on setting laser current limits, TEC current limits, and temperature windows.
Explains how to configure wake-up presets using DIP switches SW1-SW8.
Details the pinout for the laser diode output connector (9-pin D-SUB).
Explains the two operating modes: Constant Current and Constant Power.
Explains how to set and use the temperature window protection feature.
Guides on adjusting PID parameters for optimal temperature control loop performance.
Lists common IEEE488 bus commands like GET, LLO, GTL, DCL, SDC.
Details common SCPI commands for identification, reset, and status.
Explains status registers (DEC, DEE, EDE) for error monitoring.
Lists commands for operation mode, polarity, and sensor settings.
Lists and categorizes error messages encountered during operation.
Details status registers (ESR, ESE, STB, SRE) and their reporting functions.
Guides on setting the line voltage and replacing fuses.
Provides solutions for common problems like no display or incorrect output.
To Next Page
