THORLABS ITC510 User Manual

6.3 Thorlabs “End of Life” policy (WEEE)
ITC500 / page 109
Certifications and compliances
Category Standards or description
EN 61010-1/A2:1995 Safety requirements for electrical
equipment for measurement control
and laboratory use.
UL3111-1 Standard for electrical measuring and
test equipment.
U.S. Nationally
Recognized Testing
Laboratory Listing
ANSI/ISA S82.01:1994 Safety standard for electrical and
electronic test, measuring, controlling,
and related equipment.
Canadian
Certification
CAN/CSA C22.2 No. 1010.1 Safety requirements for electrical
equipment for measurement, control,
and laboratory use.
Additional
Compliance
IEC61010-1/A2:1995 Safety requirements for electrical
equipment for measurement, control,
and laboratory use.
Equipment Type Test and measuring
Safety Class Class 1 (as defined in IEC 61010-1, Annex H) - grounded product
6.3 Thorlabs “End of Life” policy (WEEE)
As required by the WEEE (Waste Electrical and Electronic Equipment Directive) of
the European Community and the corresponding national laws, Thorlabs offers all
end users in the EC the possibility to return “end of life” units without incurring
disposal charges.
This offer is valid for Thorlabs electrical and electronic equipment
• sold after August 13
th
2005
• marked correspondingly with the crossed out “wheelie bin” logo (see Figure
19)
• sold to a company or institute within the EC
• currently owned by a company or institute within the EC
• still complete, not disassembled and not contaminated
As the WEEE directive applies to self contained operational electrical and electronic
products, this “end of life” take back service does not refer to other Thorlabs
products, such as
• pure OEM products, that means assemblies to be built into a unit by the user
(e. g. OEM laser driver cards)
• components
• mechanics and optics
• left over parts of units disassembled by the user (PCB’s, housings etc.).

THORLABS ITC510 Specifications

General

Brand	THORLABS
Model	ITC510
Category	Controller
Language	English