© 2016 Thorlabs GmbH
24
MTD415T
MTD415T Data Sheet Rev. 1.0
10 List of Acronyms
The following acronyms and abbreviations are used in this manual:
AC Alternating Current
DC Direct Current
ESD Electrostatic discharges
GND Ground
GUI Graphic User Interface
I²C Inter-Integrated Circuit
µC Micro-Controller
NTC Negative Temperature Coefficient (thermistor)
PCB Printed Circuit Board
SCPI Standard Commands for Programmable Instruments
SMT Surface Mounted Technology
TEC Thermoelectric cooler