© 2016 Thorlabs GmbH
8
MTD415T
MTD415T Data Sheet Rev. 1.0
3 Typical Output Characteristics
Notes
1. The maximum TEC current of 1.5 A can be delivered into a load resistance of 2.66
W
at
recommended operating conditions.
2. At higher load resistance, the maximum output current drops due to compliance voltage
limitation.
3. The maximum output current at lower than 2.66
W
load resistance (colored range) depends
on environmental conditions.
Notes
1. The maximum output power of 6 W can be delivered into a load resistance of 2.66
W
at
recommended operating conditions.
2. The maximum output power at lower than 2.66
W
load resistance (colored range) depends
on environmental conditions.
To Next Page
Loading...
