16
Electrical shock
−
Keep the product in a dry location and do not expose
it to dust or sunlight.
−
Use the product in an environment with a
temperature between 15°C and 30°C.
− Do not twist or pull on the connectors and cables.
− Follow the connection directions.
−
Do not spill any liquid on the product or its
connectors.
− Do not short-circuit the product.
−
Never dismantle the product; do not throw it onto a
fire and do not expose it to high temperatures.
−
Do not use a power supply cable other than the one
provided with your base.
−
Do not use the power supply cable if the cable or its
connectors are damaged, split or broken.
−
Make sure that the power supply cable is properly
plugged into a wall
outlet, and properly connected to
the connector at the rear of the base.
− Do not open up the racing wheel: there are no user-
serviceable parts inside. Any repairs must be carried
out by the manufacturer, its authorized
representative or a qualified technician.
−
If the wheel rim, the base or the power supply is
functioning
abnormally (if any of them are emitting
To Next Page
Loading...
