28
5. Installing the base on a table or
desk
Before each use, verify that the base is still properly
attached to the support, as per this manual’s
instructions.
Solidity of the support
Take into account your support’s material, in order to
ensure that it is possible to mount a high-
torque base
on the support. This type of mounting is suitable for
tables and desks whose thickness is between
5 cm, as well as cockpits, for the base to be used under
the best conditions. The desk should be made of a solid
material, MDF or wood, and without any hollow
components.
To Next Page
Loading...
