Thrustmaster T598 - Installing the Base on a Cockpit

31
6. Installing the base on a cockpit
To install the base on a cockpit, there are two possible
options:
− Your cockpit is natively compatible (if the perforations
line up with those of the base): attach the base
directly to the cockpit using the four screw threads
located underneath the base, without using the
mounting plate or the two brackets.
− Your cockpit is not natively compatible (if the
perforations do not line up with those of the base):
attach the mounting plate to the base and secure
everything to your cockpit, without using the two
brackets.
Installation plans for cockpits are available at:
https://support.thrustmaster.com/product/T598p/
in the Manual section.