75
Always connect the pedal set before connecting the
racing wheel to the console.
Once the racing wheel’s self-
calibration is complete
and the game has been started, the pedals are
automatically calibrated after a few presses.
Never press the pedals when powering on your console
or your PC, starting a game, changing
mode or installing
a wheel rim on the base when the
base is powered on, or during the racing wheel’s self-
calibration phases.
This could result in improper
calibration.
If your racing wheel and/or pedal set do not function
correctly, or if they seem to be improperly calibrated:
power off your console or PC and completely
disconnect the racing wheel. Then reconnect all cables
(including the power supply cable and the pedal set),
and restart your console or PC and your game.
To Next Page
Loading...
