TI SmartView - Copying a Script to Another Application

32 Using scripts
Moving items to a different location
In the script window:
1. Highlight the items you want to move.
2. Click Edit > Cut or click .
3. Click the location where you want to insert the items.
4. Click
Edit > Paste or click .
Note: You can also use the mouse to drag the highlighted items to the
new location.
Copying items to a different location
In the script window:
1. Highlight the items you want to copy.
2. Click Edit > Copy or click .
3. Click the location where you want to insert the copy.
4. Click
Edit > Paste or click .
Note: You can also hold down Option on your computer keyboard and
use the mouse to drag a copy of the highlighted items to the new
location.
Copying a script to another application
You can copy all or only a selected portion of a script to another
application such as a word processor. You can copy the key graphics as
they are shown in the script window, or you can copy the key presses as
font text characters.
Note: When you copy as font text characters, those characters use the
TI84EmuKeys font. This font is installed on your computer automatically
when you install the TI-SmartView™ software.
Copying keys as graphics
1. Open the appropriate script.
2. Select the keys you want to copy. To select all the keys, click
Edit >
Select All
.