IX
Important Notification
Without the authorization of XATL Co., Ltd. operation personnel are not allowed to open the
apparatus, to replace any component or to debug the Genesy thermal cycler. Such as the need to
open the Genesy thermal cycler must be approved by the manufacturers and be performed by
professional maintenance personnel, otherwise XATL Co., Ltd. will not be responsible for
warranty.
Electromagnetic Compatibility Specification
The electromagnetic compatibility classification of Genesy thermal cycler belongs to Class A,
Group I.
a) The Genesy thermal cycler confirms to the emission and immunity requirements of relevant
regulations.
b) The Genesy thermal cycler is designed and tested as Class A equipment. It may cause radio
interference in family environment, which requires certain protective measures to be taken.
c) It is suggested to evaluate the electromagnetic environment before using the Genesy thermal
cycler.
d) It is prohibited to use the Genesy thermal cycler close to strong radiation source (for
example, unshielded radio source), which may affect the normal work of the Genesy thermal
cycler.
Reminding: It is manufacturer’s responsibility to provide the instrument electromagnetic
compatibility information to customers or users.
Reminding: It is users’ responsibility to provide the suitable electromagnetic
compatibility environment for Genesy thermal cycler.
To Next Page
Loading...