VIII
Remarks: In case of any following conditions, immediately cut off the power supply and contact
the distributor or the manufacturer to ask for professional maintenance personnel for
processing.
Instrument is soaked with water or rain;
Any liquid has entered into the instrument;
Abnormal sound or smell occurred while the instrument is running;
The instrument has fell off and with housing damage;
Obvious functional changes of the instrument.
8.6 Unpacking and Acceptance
The Genesy thermal cycler and its accessories are packaged in a packing case. Please check for
the quantity and quality of the instrument and the accessories according to packing list. Report
the distributor or the manufacturer in case there is any damage or lack.
After acceptance, please fill in the installation feedback table with related information, and send
it back to XATL Co., Ltd. for documentation and warranty.
Please keep the packing materials for future use, for damages as consequences of improper
packaging that incurred during the transportation back to maintenance department, XATL Co.,
Ltd. will not be responsible for the warranty.
8.7 Instrument Clean and Consumables Disposal Suggestion
Please regularly disinfect the surfaces of instrument and thermal cycle block with external UV
equipment. The disposal of abandoned experimental consumables should be treated as
biological waste.
To Next Page
Loading...