V
Caution: do not directly touch the thermal cycle block and the hot lid while the instrument
is still running, they may generate enough heat to cause serious burns. Please wait the
thermal cycle block to return to idle temperature before opening the lid and removing
samples.
Caution: the instrument should be placed in the room with low humidity, less dust and
away from water source, the room should be well ventilated and without corrosive gas.
Please avoid directly sunshine and heating furnace, stoves and other heat sources during
utilization.
5. Power Supply Safety
Caution: please check the power connection carefully. Hold the plug when you plug the
power cord and make sure the plug is perfectly inserted into the socket, do not pull the
power cord to pull out the plug.
Caution: in case of electric leakage, immediately unplug the instrument and stop using.
Prohibit: never touch the plug or the power switch with wet hands.
Caution: please cut off the power before move the instrument.
Caution: please keep the power cord away from heater or other high temperature objects.
Caution: in case the instrument will not be used for a long time, unplug it, and cover the
instrument with soft cloth or plastic bag to prevent dust from entering.
6. Biological Safety and Precautions
Biohazard:the sample objects of the Genesy thermal cycler are nucleic acids, please
consider all samples are with potential biohazard, and please take applicable safety
protection measures and wear appropriate protective goggles, clothing and gloves while
processing the samples.
Biohazard: in case of any liquid overflows during the operation, please immediately
disinfect the contaminated area with appropriate detergent to avoid the spreading of
contaminant, prevent the laboratory or instrument from biohazards.
Biohazard: please comply with the local or national applicable regulations to complete
the disposal of waste and contaminated materials.
To Next Page
Loading...