User Manual SDR-OMNI Avionics Test Set
Page 14 6 June 2023 Revision B
2.2.10 VSWR Open/Short Calibration Load
The VSWR Open/Short Calibration Load (Figure 2-10) is used during the VSWR calibration process. One side is
an open circuit, and the other side is a short circuit.
Figure 2-10 VSWR Open/Short Calibration Load
2.2.11 VSWR Bridge Connect Cables
Two identical 12-inch VSWR Bridge Connect Cables (Figure 2-11) are provided to connect the SDR-OMNI to the
INPUT and OUTPUT ports on the VSWR Return Loss Bridge. They have a BNC-male on one end and an N-male
on the other end.
Figure 2-11 VSWR Bridge Connect Cables
To Next Page
Loading...
