TidalFit EP-12 - Setting Filter Cycle

TOPSIDE CONTROL INSTRUCTIONS
Down Button: To change the time format.
Left Button: Press the left button to high light. Save Icon (you will
need to press it three times to high light the save button.)
Save
Select Button: Press the select Icon to save and return to
the main Menu.
OR
Down Button: Press the down button to highlight Cancel Icon.
Cancel
Select Button: Press the select button to cancel changes and
return to the main Menu.
Select the Setting menu.
Down Button: Press the down button to go to Filter Cycle.
SETTING FILTER CYCLE
When the Filter Cycle is highlighted:
Right Button: Press the Right button to go to the Filter Cycle Menu.
The Screen will change to Filter Cycle menu.
Filter Cycles
Filter Cycle 1
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
Filter Cycle 2 No
Starts at 12:00 AM
Runs 0 HR 0 Min
Ends at 12:00 AM
34