What to do if my Tiger JKT-D10S beeps when I press start?
If your Tiger Rice Cooker sounds an alarm (3 beeps) when you press the [Start] key, make sure that the inner pot is correctly placed inside the rice cooker.
Why can't I set the timer on my Tiger Rice Cooker?
If the timer function cannot be set on your Tiger Rice Cooker, ensure you have set the correct present time. Also, verify that the menu you are using supports the Timer function. If not, this function is not available for this menu. Finally, ensure the time you are setting is acceptable under the Timer function.
What to do if “Err” appears on the Tiger Rice Cooker display with a continuous beep?
If the display of your Tiger Rice Cooker shows “Err” and a continuous beeping alarm sounds, it may be due to blocked air vents or high room temperature. Unplug the device, move it to a cooler location where the air inlet and outlet are not obstructed. Plug it back in and try again. If it still doesn't respond, unplug it and contact the place of purchase, as it indicates a malfunction.
Why nothing happens when a key is pressed on my Tiger JKT-D10S Rice Cooker?
If nothing happens when you press a key on your Tiger Rice Cooker, ensure the power plug is fully inserted into the outlet. If the issue persists, press the [Cancel] key to turn off the Keep Warm function, and then try the operation again.
Why does my Tiger Rice Cooker lose time settings when unplugged?
If the present time, preset timer settings, and elapsed Keep Warm time are lost when the power plug of your Tiger Rice Cooker is disconnected, the lithium battery has likely run out. Contact the place of purchase.
General| Model | JKT-D10S |
|---|---|
| Capacity | 1.0 L |
| Dimensions | 25.2 x 28.6 x 26.8 cm |
| Weight | 2.5 kg |
| Material | Stainless Steel |
| Features | Keep warm function |
| Type | Rice Cooker |
| Cooking Settings | White Rice, Brown Rice, Quick Rice |
| Inner Pot Material | Non-stick Coating |
| Power | 600 W |
| Voltage | 220 V |
| Functions | Cooking, Keep Warm |
To Next Page
