Tiger TI-01SS - Weighing Procedures; Tare Weighing

3
② TURN OFF：
PRESS <OFF> KEY.
③ AUTO TURN OFF：
WHEN SCALE IS IN AUTO OFF STATE. IT WILL BE AUTO OFF AFTER 10 MINUTES WHEN SCALE
IS AT ZERO AND NO
OPERATION.（ SEE 3.9.3 ）
④ LOW VOLTAGE OFF:
WHEN THE VOLTAGE IS TOO LOW, IT WILL AUTO TURN OFF.
3.3 ZERO
WHEN WITHOUT TARING THE WEIGHT DISPLAY IS ≤4% MAX. CAPA.,，PRESS <ON /ZERO>，THE
DISPLAY SHOWS “ 0 ”，”ZERO” LAMP LIGHTING.
3.4 WEIGHING
PUT WEIGHT ONTO THE PAN，IT SHOWS THE WEIGHT， LAMP LIGHTING.
3.5 TARE WEIGHING
FIRST PUT A CONTAINER ON PLATE, PRESS <TARE >， IT SHOWS 0，”ZERO” LAMP OFF，”TARE” LAMP
LIGHTING, PUT THE WEIGHT
ON CONTAINER IT WLL SHOW NET WEIGHT. REMOVE THE WEIGHT AND CONTAINER TOGETHER, IT
DISPLAYS NEGATIVE TARE,
“ZERO” LAMP LIGHTING. NOW PRESS <TARE >，”TARE” LAMP OFF, RETURN TO NORMAL STATE.
3.6 SAVE POWER FUNCTION
ZERO AFTER 40 SECONDS, AUTO SAVE POWER, SHOWS “o ”. PUT A WEIGHT, START WEIGHING.
3.7 BATTERY INDICATE
BATTERY LAMP
FLASHING
BATTERY VOLTAGE
FULL
HALF
LOW
WILL TURN OFF
3.8 CHARGE
PUT THE PLUG IN THE SOCKET, IS CHARGING LAMP， IS LIGHTING WHEN
CHARGING.
SHOW VOLTAGE：AFTER POWER ON AND ON “0”, THE SAME TIME PRESS <ON
/ZERO> AND <TARE > THREE SECONDS, NOW
DISPLAY THE BATTERY VOLTAGE, PRESS <SET/0~9> TO EXIT.