Tiger TI-01SS - A-Off (Choose Auto Power Off); Zero (Set Auto Zero Range); Buzze (Set Buzzer in Upper and Lower Limit Situation); D (Choose Division)

5
AND PRESS<TARE>TO CHOOSE. AFTER FINISHING IT DISPLAY PCS AND PCS LAMP
LIGHTING.
EXIT COUNTING: CHOOSE A UNIT.
CAUTION: PICK QUANTITIES OF MAX LESS 30000
3.9.3 A-oFF（CHOOSE AUTO POWER OFF）
WHEN IT DISPLAYS A-oFF，PRESS <TARE> TO ENTER，PRESS <SET/0~9> TO CHOOSE n
OR y, n IS NOT IN AUTO POWER OFF SITUATION，y IS AFTER 10 MINUTES IN ZEROING,
AUTO-OFF.
3.9.4 FILt(SET DISPLAY MODE)
WHEN IT DISPLAYS FILt，PRESS <TARE>TO ENTER，PRESS <SET/0~9> TO CHOOSE FILt-1 OR
FILt-2 OR FILt-3 OR FILt-4，
PRESS <TARE>TO CONFIRM.
FILt-1：SINGLE ANIMAL SCALE FUNCTION，AFTER PLACE WEIGHT，WEIGHT
LOCKED IN 3 SECONDS， LIGHTING，
UNLOCKED AFTER REDUCE MORE THAN HALF PLACED WEIGHT，CAN
NOT USE FOR TRADE SETTLEMENT
FILt-2：MANY ANIMALS SCALE FUNCTION，AFTER PLACE WEIGHT，IT SHOWS
VERY SLOWLY，THEN LIGHTING，CAN
USE FOR TRADE SETTLEMENT
FILt-3：WHEN ADD WEIGHT TO SCALE, IT WILL SHOW FAST.（SUGGESTION）
FILt-4：WHEN ADD WEIGHT TO SCALE, IT WILL SHOW MORE FASTER.
3.9.5 ZEro(SET AUTO ZERO RANGE)
WHEN IT DISPLAYS ZEro，PRESS <TARE>TO ENTER，IT DISPLAYS ZEro x.x(x.x IS AUTO ZERO
RANGE：
0.5d,1d,1.5d,2d,2.5d,3d,3.5d,4d,4.5d AND 5d,d IS DIVISION VALUE WHEN n=3000) ， PRESS
<SET/0~9> TO CHOOSE，PRESS
<TARE> TO CONFIRM AND RETURN WEIGHING.
3.9.6 bUZZE(SET BUZZLE IN UPPER AND LOWER LIMIT SITUATION)
WHEN IT DISPLAYS bUZZEr，PRESS <TARE> TO ENTER，PRESS <SET/0~9> TO CHOOSE on
OR oFF, on IS USING “DING…” SOUND IN UPPER AND LOWER LIMIT SITUATION，oFF IS
WITHOUT “DING…” SOUND.
3.9.7 d(CHOOSE DIVISION)
WHEN IT DISPLAYS d，PRESS <TARE> TO ENTER，PRESS <SET/0~9> TO CHOOSE
DIVISION，PRESS <TARE> TO CONFIRM，
THERE HAVE THREE DIVISIONS OF EACH CAPACITY. WHEN YOU CHOOSE THE LITTLE ONE,