THE SPEED OF DISPLAY WILL
BE SLOWER.
3.9.8 LU-（BRIGHTNESS ADJUSTING）
WHEN IT DISPLAYS LU-, PRESS <TARE> TO ENTER，PRESS <SET/0~9> TO CHOOSE，LU-1
IS LOWER BRIGHTNESS，LU-2 IS
HIGHER BRIGHTNESS，PRESS <TARE> TO CONFIRM.
4
NOTES
4.1 NORMAL NOTE
4.1.1 PLEASE READ THE INSTRUCTION MANUAL BEFORE USAGE.
4.1.2 PLEASE CALIBRATE SCALE REGULARLY.
4.1.3 DO NOT OVERLOADING. DO NOT THROW HEAVY THINGS ON THE SCALE VIOLENTLY. THE
DAMAGE FOR OVERLOADING IS
NOT WITHIN THE RANGE OF GUARANTEED MAINTENANCE.
4.1.4 DON’T TOUCH CHEMICALS SUCH LIKE SOLVENT, ETC.
4.1.5 KEEP THE SCALE CLEAN IN ORDER TO WEIGHING WELL.
4.1.6 THERE IS A LEAD SEAL ON THE BOTTOM OF THE SCALE. USERS ARE NOT ALLOWED TO REMOVE
THE SEAL. IF THE SEAL IS
DAMAGED THE SCALE IS NOT GUARANTEED FOR MAINTENANCE.
4.2 FOR SEALED LITHIUM BATTERY
4.2.1 THE WORKING TEMPERATURE OF BATTERY IS -10℃~+50℃. IT CAN BE CIRCLE CHARGED
ABOUT 500 TIMES AT 20℃.
4.2.2 PLEASE DON‟T CHANGE BATTERY BY YOURSELF.
4.2.3 PLEASE CHARGE IN TIME. PLEASE FULL CHARGE IF YOU DON‟T USE THE
SCALE FOR A LONG TIME. PLEASE CHARGE AT LEAST
EVERY 3 MONTHS.
4.2.4 THE CAPACITY OF BATTERY WILL BE REDUCED AFTER CHARGE/DISCHARGE
MANY TIMES.
5
CALIBRATION
5.1 PUSH THE ADJUST KEY TO SWITCH ON（THE ADJUST KEY IS IN INDICATOR），PRESS <ON/ZERO> TO
TURN ON，AFTER
SELF-INSPECTION IT COMES INTO WEIGHING(NO WIND AND QUAKING) AND UNDER ZERO；
5.2 THE SAME TIME PRESS <SET/0~9> AND <ON/ZERO> 3 SECONDS，IT SHOWS THE LAST CAPACITY，
FOR EXAMPLE c-60 MEANS 60kg.
PRESS <SET/0~9> TO CHOOSE c-30，c-60，c-100, c-150，c-200, c-300，c-600，c-1500，c-3000，c-6000
（C IS CAPACITY，UNIT IS kg）；
To Next Page
Loading...
