Please retain instructions for future reference
15
Step 9:
BUILDING A WALL FOR ¾ WINDOW
• Build 6 logs high using 1750mm / 1150mm full logs depending on size of building. Then use 274mm cut logs to
start building window frame.
Use supplied construct diagram for reference.
• Secure 274mm cut log through notch into log below using 1x S40. Drill a pilot hole at an angle through the cut
log into the full log below and screw into place as shown using 1 x S40.
(Detail E In Step 8 For Reference)
• Continue to build upwards. Secure built walls using 190mm spacers every ve
logs high using 2x S35.
(Detail H & H1)
S35 S35
S35
H
H1
190MM
SPACER
To Next Page
Loading...
